GCF 185 Machinist (CNC Operator) Recruitment

Qualification Required

ITI / Diploma

Examinaton Fees

• General : 200
• OBC : 200
• ST : 0
• SC : 0
• Payment Modes Accepted : Net Banking, Credit Card, Debit Card, UPI

In the GCF recruitment for the post of Machinist (CNC Operator), the application fee details are as follows: Candidates belonging to General are required to pay 200 as the application fee. Candidates belonging to OBC are required to pay 200 as the application fee. No fee is applicable for ST category candidates. No fee is applicable for SC category candidates.

Selection Procedure

1. Interview

The selection procedure for the post of Machinist (CNC Operator) in GCF will include the following stages: Interview, and other required tests.

Vacancy Details

Machinist (CNC Operator)

• Vacancies: 86
• Salary: Rs. 19900 /-
• Qualification: Skilled in CNC operations (Siemens/Fanuc), tools setting, part alignment and independently operating measuring instruments like Vernier calipers, micrometers, bore gauges etc.
• Minimum Age Limit: 18
• Maximum Age Limit: 35

Fitter

• Vacancies: 41
• Salary: Rs. 19900 /-
• Qualification: Assembling/Stripping/Dismantling/Fitting work of various assemblies/sub-assemblies/components. Must have good knowledge of Hand Tapping work with measuring Instruments.
• Minimum Age Limit: 18
• Maximum Age Limit: 35

Welder

• Vacancies: 22
• Salary: Rs. 19900 /-
• Qualification: To perform TIG/MIG Welding on assemblies meeting RT/UT standards. He should independently handle fitting related tasks.
• Minimum Age Limit: 18
• Maximum Age Limit: 35

Heat Treatment Operative

• Vacancies: 14
• Salary: Rs. 19900 /-
• Qualification: To operate different types of Heat Treatment Furnaces likewise PIT type, Bogie Hearth, Induction & Nitriding furnaces.
• Minimum Age Limit: 18
• Maximum Age Limit: 35

Electroplater

• Vacancies: 6
• Salary: Rs. 19900 /-
• Qualification: Carry out electroplating, phosphating and chemical surface treatment of metallic components. Responsible for bath maintenance, solution testing, quality control of plated component and safe handling of chemical and PPE adherence.
• Minimum Age Limit: 18
• Maximum Age Limit: 35

Examiner

• Vacancies: 6
• Salary: Rs. 19900 /-
• Qualification: Carry out QC Dimensional Inspection of any component as per AHSP drawing and specification, have ability to read Vernier Calipers, Inside/Outside Micrometers, Digital Height Gauges, Slip Gauges.
• Minimum Age Limit: 18
• Maximum Age Limit: 35

Blacksmith

• Vacancies: 5
• Salary: Rs. 19900 /-
• Qualification: Carry out blacksmithing, forging, fabrication and allied shop-floor activities related to production, repair and maintenance works. Operation in handling, Material Handling Equipment.
• Minimum Age Limit: 18
• Maximum Age Limit: 35

Turner

• Vacancies: 5
• Salary: Rs. 19900 /-
• Qualification: Skilled in CNC operations of Turning & Milling (Siemens/Fanuc), tools setting, part alignment and independently operating measuring instruments like Vernier calipers, micrometers, bore gauges etc.
• Minimum Age Limit: 18
• Maximum Age Limit: 35

The vacancy details for the post of Machinist (CNC Operator) released by GCF are as follows:

A total of 86 vacancies are available for the position of Machinist (CNC Operator).
A total of 41 vacancies are available for the position of Fitter.
A total of 22 vacancies are available for the position of Welder.
A total of 14 vacancies are available for the position of Heat Treatment Operative.
A total of 6 vacancies are available for the position of Electroplater.
A total of 6 vacancies are available for the position of Examiner.
A total of 5 vacancies are available for the position of Blacksmith.
A total of 5 vacancies are available for the position of Turner.

The salary for the post of Machinist (CNC Operator) is set at Rs. 19900 /-.
The minimum qualification required for the post of Machinist (CNC Operator) is: Skilled in CNC operations (Siemens/Fanuc), tools setting, part alignment and independently operating measuring instruments like Vernier calipers, micrometers, bore gauges etc..
The age limit for the post of Machinist (CNC Operator) is between 18 to 35 years.
The salary for the post of Fitter is set at Rs. 19900 /-.
The minimum qualification required for the post of Fitter is: Assembling/Stripping/Dismantling/Fitting work of various assemblies/sub-assemblies/components. Must have good knowledge of Hand Tapping work with measuring Instruments..
The age limit for the post of Fitter is between 18 to 35 years.
The salary for the post of Welder is set at Rs. 19900 /-.
The minimum qualification required for the post of Welder is: To perform TIG/MIG Welding on assemblies meeting RT/UT standards. He should independently handle fitting related tasks..
The age limit for the post of Welder is between 18 to 35 years.
The salary for the post of Heat Treatment Operative is set at Rs. 19900 /-.
The minimum qualification required for the post of Heat Treatment Operative is: To operate different types of Heat Treatment Furnaces likewise PIT type, Bogie Hearth, Induction & Nitriding furnaces..
The age limit for the post of Heat Treatment Operative is between 18 to 35 years.
The salary for the post of Electroplater is set at Rs. 19900 /-.
The minimum qualification required for the post of Electroplater is: Carry out electroplating, phosphating and chemical surface treatment of metallic components. Responsible for bath maintenance, solution testing, quality control of plated component and safe handling of chemical and PPE adherence..
The age limit for the post of Electroplater is between 18 to 35 years.
The salary for the post of Examiner is set at Rs. 19900 /-.
The minimum qualification required for the post of Examiner is: Carry out QC Dimensional Inspection of any component as per AHSP drawing and specification, have ability to read Vernier Calipers, Inside/Outside Micrometers, Digital Height Gauges, Slip Gauges..
The age limit for the post of Examiner is between 18 to 35 years.
The salary for the post of Blacksmith is set at Rs. 19900 /-.
The minimum qualification required for the post of Blacksmith is: Carry out blacksmithing, forging, fabrication and allied shop-floor activities related to production, repair and maintenance works. Operation in handling, Material Handling Equipment..
The age limit for the post of Blacksmith is between 18 to 35 years.
The salary for the post of Turner is set at Rs. 19900 /-.
The minimum qualification required for the post of Turner is: Skilled in CNC operations of Turning & Milling (Siemens/Fanuc), tools setting, part alignment and independently operating measuring instruments like Vernier calipers, micrometers, bore gauges etc..
The age limit for the post of Turner is between 18 to 35 years.

How to Apply

For the post of Machinist (CNC Operator), the application process is online. Candidates can apply from the official website of GCF before the last date of online application which is 31/05/2026. The official notification PDF is also available.

Important Links

FAQs – Frequently Asked Questions

• Q1: What is the last date to apply for Machinist (CNC Operator)?
• A: The last date to apply is 31/05/2026.
• Q2: What is the application process?
• A: The application process is online.
• Q3: How many vacancies are available?
• A: There are 185 vacancies available.
• Q4: What is the required qualification?
• - ITI
• Q5: Where can I apply?
• A: You can apply at the official website: Click Here.